Boot Samsung Galaxy J5 Prime into Download Mode using our step-by-step tutorial. Download mode is a special state or we can say a sub-system of an Android device and is mainly used to flash stock firmware through official means. Once you enter your Galaxy J5 Prime into download mode, the system of your device will boot from external sources instead of the stock bootloader which will directly help you to replace the stock ROM on your device. Moreover, the download mode is also widely used in gaining root access, installing custom recovery, custom ROMs, boot loaders, kernels, modems, pit files, system updates, etc.
Samsung Galaxy J5 Prime, also known as Samsung Galaxy On5 (2016) has some mouth-watery specs and features including 5.0 inches PLS TFT screen with 720 x 1280 pixels of resolution, a Quad-core 1.4 GHz Cortex-A53 Exynos Processor with 32 GB of internal storage and 2 GB of RAM. It also features 13 megapixels of primary camera and 5 megapixels of front camera for selfies. It comes with Android 6.0.1 Marshmallow OS out of the box.
To enter the downloading mode, it is not necessary that your phone is rooted. Download mode, also called Odin mode, can be entered on any smartphone or tablet irrespective of whether it is rooted or unrooted or has custom ROM or stock ROM installed. To confirm that you’ve successfully booted your Galaxy J5 Prime into download mode, you’ll see a black/blue screen with an Android image in it that says “Downloading”.
There are different methods to boot Galaxy J5 Prime into download mode. The universal method is by pressing and holding the hard keys/buttons. But what if your button is not working or is broken? Still, it is possible to boot your Galaxy J5 Prime into download mode. Entering Galaxy J5 Prime into download mode is one of the easiest tasks that any Android user can implement, as you just need to follow any of the instructions mentioned below. In this step-by-step guide, we’ll discuss four important methods for easily entering Galaxy J5 Prime into download mode with or without keys.
How to Enter Samsung Galaxy J5 Prime into Download Mode
Here we have mentioned 4 different ways to enter your Galaxy J5 Prime into download mode. You can refer to any one of them.
Note that these methods are applicable to all variants of Samsung Galaxy J5 Prime including SM-G570, SM-G570F/DS, SM-G570Y.
Method 1: Using Hard Keys
Step 1: Switch off your Samsung Galaxy J5 Prime smartphone completely until it vibrates.
Step 2: Press and Hold Volume Down key + Home button (middle button) + Power button simultaneously until you see a warning message. Leave all the keys as you see the warning message window.
Step 3: Now just press Volume up button to continue.
This will directly land your Galaxy J5 Prime into download mode.That’s all! You’ve successfully booted your Galaxy J5 Prime into download mode using hard keys.
Method 2: Using ADB commands
ADB and Fastboot is a versatile command line tool that lets you communicate with your device when connected to computer (Windows, Mac or Linux) using a USB cable. Through these commands you can perform various actions such as installing and debugging apps, backing up partitions and many more. Lets use this ADB and Fastboot method to boot your Samsung Galaxy J5 Prime into download mode.
Step 1: Firstly enable the USB debugging mode on your phone. For doing so, follow the path Menu->Settings->Developer options ->USB debugging. If you don’t see Developer option then go to Settings->About Phone and tap 7 times on the Build number. This will make the Developer option appear in the Settings menu.
Step 2: Also enable OEM unlocking and Advance reboot mode from Developer options.
Step 3: Download and install ADB and Fastboot setup on your computer.
Step 4: Connect your Galaxy J5 Prime to computer using USB cable.
Step 5: Launch Command window on your computer. For doing so, hold Shift button and right mouse click anywhere on your PC. You’ll see a list of options from which select Open command window here option. This will launch the command prompt window on your computer.
Step 6: Now to ensure that your Galaxy J5 Prime is properly connected to your computer or not, type the following commands in the command window and press enter key:
adb devices
As soon as you press enter key, you’ll see a message saying ‘List of devices attached’ along with some random numbers. This will confirm that your Galaxy J5 Prime has properly connected to your computer.
Note: If such thing doesn’t happen, then re-install device drivers, enable USB debugging mode and try again. If the problem still persists, try changing USB cable or even the USB port.
Step 7: Now to boot your Samsung Galaxy J5 Prime into download mode, type the following command in the command window and hit enter key:
adb reboot download
As soon as you press enter key, your Galaxy J5 Prime will boot into download mode.
Method 3: Using Terminal Emulator (Requires ROOT)
Terminal Emulator app helps you in accessing the Android’s built-in Linux command line shell.
This method requires root access on your phone.
Step 1: Download and install Terminal Emulator App on your Samsung Galaxy J5 Prime smartphone.
Step 2: Launch Terminal Emulator App.
Step 3: Type this command in it and press enter:
su
Step 4: As soon as you hit enter key, a popup will appear to grant Superuser permissions. So click on the Grant option.
Step 5: On the next line type the following command and press enter:
reboot download
As soon as you hit enter key, your Galaxy J5 Prime will enter into download mode.
Method 4: Using Quick Reboot App (Requires ROOT)
Quick Reboot app provides advanced reboot options to boot your Galaxy J5 Prime into download mode, recovery mode, normal reboot, fast reboot, safe mode and much more.
This method also requires root access on your phone.
Step 1: Download and install Quick Reboot app in your Samsung Galaxy J5 Prime smartphone.
Step 2: Launch Quick Reboot app.
Step 3: Tick the ‘I have read and accept the terms’ and click on confirm.
Step 4: To boot into download mode, simply click on Fastboot mode option.
Step 5: Then Tap on Yes to confirm.
Step 6: As soon as you hit Yes, a popup will appear to grant Superuser permissions. So click on Grant option.
This will enter your Galaxy J5 Prime into download mode.
How to Exit (get out of) Download Mode
- For Android phones with a removable battery, you just need to open the back panel, remove and re-insert the battery and then normally start the phone by pressing Power button.
- For non-removable battery phones, long press + hold the Power button to exit the download mode and restart the device.
- For phones with Android 6.0 Marshmallow and above OS, Google has introduced new process to exit the Download mode. For that you need to press and hold Power button + Volume Down key simultaneously until your device reboots.
I hope that this clears things up on how to enter and exit your Samsung Galaxy J5 Prime SM-G570, SM-G570F/DS, and SM-G570Y into Download Mode.
If you have any queries regarding the guide mentioned above, then do contact me through the comments section. It’ll be a pleasure to help you guys. Till then Keep Smiling and Peace Out!
